 |
 |
F-1, F-2, GDS (Gas Distribution Systems) modules
F-1 Join Plastic Pipe with Fusion (regulated by 49 CFR 192.460 )
Re-qualification is required annually
- Identify material specifications and installation practices for polyethylene pipe
- Join plastic pipe using Butt Fusion, Socket Fusion, Sidewall Fusion, Electro-fusion
- Control Static Electricity on plastic piping
F-2 Join Plastic Pipe with Mechanical Fittings (regulated by 49 CFR 192.460 )
Re-qualification is required annually
- Identify material specifications and installation practices for polyethylene pipe
- Join plastic pipe with mechanical compression & stab type fittings
- Control Static Electricity on plastic piping
- Hands-on skills assessment
Gas Distribution Systems Series
- GDS 1.1 Identifying Procedures / Processes Basic to Producing, Transporting, and Distributing Natural Gas
- GDS 1.2 Identifying Basic Properties of fuel Gases
- GDS 1.3 Adjusting Gas Burners for Proper Combustion
- GDS 1.4 Measuring & Regulating Natural Gas in a Distribution System
- GDS 2.1 Detecting and Pinpointing Gas Leaks
- GDS 2.2 Investigating Reported Gas Leaks and Odors in Buildings
- GDS 2.3 Locating & Marking Underground Pipeline Facilities
- GDS 2.6 Investigating for Carbon Monoxide
- GDS 3.1 Identifying Procedures to Consider When Establishing Gas Service
- GDS 3.12 Inspecting for Irregularities in the Condition of Meter Regulator Installations
- GDS 3.2 Inspecting, Pressure Testing & Leak Checking Housepiping
- GDS 3.10 Inspecting & Maintaining Valves Commonly Used in Natural Gas SystemsGDS 4.7 Repairing Steel and Plastic Pipe in Natural Gas Systems
- GDS 4.9 Identifying Techniques Common to Purging Pipelines
|
Other class descriptions:
SERVICE LINE/PLUMBER OQ SERIES
CONTRACTOR OQ SERIES
MASTER METER OQ SERIES
|
© 2004-2009 Utility Technologies International Corporation All Rights Reserved
|
|
|